Our indoor series of Solid-State Power Amplifiers (SSPAs) includes the CPA for C-Band, the KPA for Ku-Band and the XPA for X-Band. Each model has a rack-mountable chassis, power supply, fan assembly, front panel assembly, Monitor/Control Processor (MCP), and an SSPA module. The amplifiers were designed using our low-loss combining technique and an MCP-based temperature versus gain compensation.

The front panel of the units features a user-friendly Liquid Crystal Display (LCD) menu display and cursor control keys to display status and enable parameter configuration. The front panel also has LEDs for quick reference to binary status points and both input and output sample ports for easy test point access.

The units each deliver the rated power, guaranteed, at the 1 dB compression point, to the transmit waveguide flange. The amplifiers are cost-effective and provide a reliable replacement for alternate technologies. As a result of the small form factors, the CPA, KPA and XPA are ideal for the construction of small “flyaway” terminals, medium sized (equivalent to Intelsat F class) earth stations, and hub earth stations for small to medium size private networks or point-to-point links.

The SSPAs are constructed with highly reliable Gallium Arsenide Field Effect Transistors (GaAs FETs). Solid-State provides significant advantage over alternate technologies, including:

• More superior third order inter-modulation products – from 4-6 dB better

• Saturated power levels up to twice that of the CPA’s, KPA’s or XPA’s rated output

• Greater Mean Time Between Failure (MTBF) – 4-6X better

The CPA, KPA and XPA are also equipped with useful features that other manufacturers offer as chargeable options. Included in the base price of our units are:

• Temperature compensation

• Sample ports

• Power monitor

• Rack slides

• Full remote monitor and control capabilities

Built-In Redundancy Controller

Each amplifier has the ability to function as a 1+1 or 1+2 redundancy controller in the backup mode. The optional redundancy configuration is implemented by attaching a ganged waveguide/coax transfer switch(es) to the input and output connectors of the amplifiers with a combination coaxial cable and waveguide kit. When the backup SSPA is commanded into the controller mode, it monitors the online SSPA(s) for faults. A faulted online unit may be disconnected and replaced without affecting the online power amplifier.

Remote Control

The remote control interface is selectable between EIA-232 and EIA-485, as well as full Ethernet including Telnet, SNMP and preloaded HTML GUI. All configuration control, status retrieval, and adjustments are available as simple ASCII commands through the serial interface or through the front panel menu. As a cost option, the remote control command structure can be customized in order to accommodate existing network control software.

Подробнее.